Why does the inflatable slide/castle have to be inflated all the time? Are there any safety problems?

　　After a long time use of toys, the gap between the stitching of some parts of the pinhole increases and the amount of air leakage increases significantly, so you can consider using cloth to stick on the seams to reduce the amount of air leakage, but in order to fully ensure the amount of air leakage, frequent inflation, there is no safety problem.

　　Inflatable container is the appearance of the castle-shaped inflatable container, made of environmentally friendly soft pvc biogeology, in a closed state through the fan to continuously supply air to maintain the shape of the product. Provide games for children. That cute, unique shape is loved by children. Also known as: aviation city, children's city, aviation trampoline, aviation big slide, children's playground, etc.

　　1、Inflatable slide paste requirements

　　Apply glue evenly at the toy paste and fabric, then dry to half, paste the fabric sample at the paste, flatten it and paste it without warping the edge, paste it and finish.

　　2、Toys are broken

　　(a) the cut is more than 5cm, sew on the needle and thread, paste with cloth or fabric samples

　　(B) if the cut is less than 5cm, direct paste can be

　　3、The stitches are open

　　First sew the opening part flat with needle and thread (or take off from the bottom of the air cushion and then sew on), and then firmly handle the opening part by pasting, while considering the beautiful

　　4、Bend in the beautiful place

　　Use a small brush to apply the right amount of adhesive in the warped place, slightly stop and press flat, paste firmly on it

　　5、Degumming

　　Part of the easy to wear parts of the long use of easy to decoupage, with fabric cut into different shapes paste in the decoupage can

　　6、Large gas leakage

　　Toys after prolonged use, some parts of the pinhole stitching gap increases, the amount of gas leakage increased significantly, you can consider using cloth paste in the seams to reduce the amount of gas leakage, in the case of toys too old, to consider scrapping, so as not to avoid problems in the operation

　　7, the air cushion local abnormal bulge

　　Generally speaking, the towel is split from the air cushion, along the line decomposition of the bottom of the air cushion, with a needle and thread to connect the bridging tendons and air cushion, with cloth paste, to protect the line gap can be.

　　8, inflatable slide maintenance common sense

　　(a), the toy before deflating, clean the surface of the toy with a semi-dry towel, dry and deflate, folded and placed in a cool place for safekeeping.

　　(B), toys stored without water, can not be cleanly discharged, blow up in a dry and ventilated place, dry until the water evaporates. Please avoid the custody of water.

　　(C), send the fan to prevent moisture, must be kept in a dry and ventilated place.

　　(d), toys for long-term storage, should be regularly checked for moisture, with a ventilator to blow clean.